- St. No-3, Jasdev Singh Nagar, Gill, Ludhiana, P.B., India
- +91-98142-01756, 79731-80659
- info@nobleindustries.org
Excel Turn-4
Standard Accessories-
1. 3 Tool Posts for Cross Slide
2. Full Enclosed guarding and chip collection tray
3. Automatic speed range change
4. Automatic lubrication of the slide ways
5. Constant surface speed
6. Electronic handwheel common for X, Z Axis
7. One work light
8. Main spindle reducing bush for fixing centre and collet(5c)
9. Instruction manual
10. Pneumatic operated collet/chuck for clamping/declamping
11. Manual Operated Tail Stock
Optional Accessories (At Additional Cost)
1. Extra Chuck
2. Transformer for Power Supply
3. Compressor for Air Supply
4. Front Coupling for A2-4 or A2-5 Spindle
5. Face Plate
6. Quick Change Tool Post
7. Morse Taper Live Centre
8. Drill Chuck
9. Collets (5-C or 16C)
10. Set of Spanners & Keys
11. Levelling Pads
12. Top Plate with Three Tool Posts for Quick Shift to Another Program
2. Full Enclosed guarding and chip collection tray
3. Automatic speed range change
4. Automatic lubrication of the slide ways
5. Constant surface speed
6. Electronic handwheel common for X, Z Axis
7. One work light
8. Main spindle reducing bush for fixing centre and collet(5c)
9. Instruction manual
10. Pneumatic operated collet/chuck for clamping/declamping
11. Manual Operated Tail Stock
Optional Accessories (At Additional Cost)
1. Extra Chuck
2. Transformer for Power Supply
3. Compressor for Air Supply
4. Front Coupling for A2-4 or A2-5 Spindle
5. Face Plate
6. Quick Change Tool Post
7. Morse Taper Live Centre
8. Drill Chuck
9. Collets (5-C or 16C)
10. Set of Spanners & Keys
11. Levelling Pads
12. Top Plate with Three Tool Posts for Quick Shift to Another Program
| TECHNICAL SPECIFICATIONS :- | EXCEL-TURN CNC LATHE 4-150 | |
1. Centre height |
mm |
150 |
2. Distance between centres |
mm |
350 |
3. Swing over Bed |
mm |
300 |
4. Swing over carriage |
mm |
250 |
5. Swing over cross slide |
mm |
140 |
6. Bed width |
mm |
160 |
7. Main spindle bore |
mm |
31.75 |
8. Main Spindle nose |
mm |
A2-4 |
9. Main Spindle Taper Or Collet Style |
MT/5-C |
MT-3/5-C |
10. Speed Range |
rpm |
1(Variable) |
11. Variable Speed Range |
rpm |
3000 |
12. Z, X Working Feed |
mm/min |
10000 |
13. Z, X Rapid Feed |
m/min |
15 |
14. Tailstock Shank Travel(Manual) Dia-X Travel |
mm |
Dia 32 X 90 |
15. Tailstock Taper |
MT |
3 |
16. Main Motor Power |
Kw. |
3 |
17. Pump motor power |
Kw. |
0.57 |
18. Z axis Motor force |
N/m2 |
2.7 |
19. X axis Motor force |
N/m2 |
2.7 |
20. Controller |
Taiwan |
Hust |
21. Collet Style(and maximum Capacity) |
5-C |
26mm(Bore) |
22. Chuck Size(pneumatic) |
mm |
Dia 130 max |
23. Bar Capacity (for Collet) |
mm |
26(Max) |
24. Chuck capacity (Ring Type/Bar Type) |
mm |
Dia 125 & Dia 60 |
25. Tool Shank Size |
mm |
16 X 16 |
26. X,Z Travels |
mm |
250 X 350 |
